Operator`s manual

8. Chases - Page 155
TitanUniversal_Man_v7-0_PE.doc 02 September 2013
When a chase is unlinked, raising the fader does not fire
the first cue, which can be a problem. To get round this,
if the chase is not looped, simply link the first cue to the
previous one. If the chase is looped, add a dummy step
at the end with 0 sec fade, 0 sec delay and link the first
step to this one.
8.6.4 Renumber cues
Option [Renumber cues] will renumber all the cues in the chase
starting from 1.