Operator`s manual

Page 14 – 1. Quick Start
TitanUniversal_Man_v7-0_PE.doc 02 September 2013
At top menu press [Shapes and Effects], [Shape Generator],
[Create]. Select attribute of shape then select a shape to run.
(Section
6.1.1, p96).
Or from the Shape Library window (
View, [Open Workspace Window],
[Shape Library]) you can select a shape directly. Filter the list of
shapes using the attribute buttons.
Use the wheels and [Adjust Speed, Size and Phase]/[Adjust Phase,
Spread and Offset] to configure the shape.
Fixture Groups
Fixtures may be grouped for quick selection, press Group, [Record
Group], select fixtures for group, set legend using [Provide a legend],
press [Store]. Order of fixture selection is remembered for use with
shapes. (Section
4.1.13, p73).
1.3 Programming cues and chases
Cues
Set up the look to be recorded.
Press Record Cue.
Set [Record Mode] to Channel (saves only modified attributes),
Fixture (saves all attributes of fixtures which have been modified or
are selected), Stage (saves all attributes of all fixtures with nonzero
dimmer), or Quick Build (merges palettes and playbacks into the cue
when you select them).
To store, press blue Select button on playback fader or preset fader,
or press button in Playbacks window. (Section
7.1.2, 128).
Chases
Press Record Chase.
Press blue Select button on a playback fader or preset fader, or press
button in Playbacks window.
Set up the look for the first step, press playback select button to
store. Repeat until all steps stored. Quick Build mode can be used to
merge palettes and cues into chase steps.
Press Exit to finish storing chase steps. (Section
8.1.1, 145).
Timings
All times (cue times and fixture attribute times) are stored in the
programmer and are saved when you store a cue.
To edit times in the programmer before saving, press the Times
button (previously labelled “Set” on Titan Mobile/Sapphire Touch and
“Next Time” on Pearl Expert/Tiger Touch).
For chases, speed and fade can be set with wheels A and B when the
chase is running.
To edit times in a saved cue, at top level menu press [Edit Times]
then the select button for the playback. Timing options are set from
softkeys.