Operator`s manual

Copyright Avolites Limited 2010
8. Cue Lists - Page 97
PearlExpertTitan_Man_v4.doc 29/09/2010 16:27:00
• To add more cues to the end of the existing cues press [Append
cue].
• To edit an existing cue, press [Cue Number=] and type the cue
number to edit. Make the
changes then press
[Update Cue x].
• To insert new cues, see
section
8.3.2.
• The Advanced Options
menu allows you to
renumber all the cues, and
to change the number of
an existing cue.
• There is no limit to the
number of cues in a cue
list.
8.1.2 Changing legends for cues in a cue list
You can set a legend for each cue, which is shown on the LCD when
running the cue list and can be helpful for keeping track of where you
are.
1> Press [Set Legend] in the top level menu. If you are setting
legends for several cues, press ML Menu to latch the Set
Legend menu.
2> Press the Select button of the Cue List.
3> The cues in the cue list are shown on the LCD screen. Use
Wheel A to select the cue which is to have a legend set.
5> Press E and type the legend on the keyboard, then press Enter.
6> If you latched the menu, you can continue to set legends for
other cues, or press Exit to finish.
8.1.3 Autoloading a playback within a cue list
You can program a cue within a cue list to automatically load one or
more playbacks when the cue fires. The playback can be a single cue,
a chase or another cue list. This can be useful to trigger off chases or
effects from the cue list.
You can either automatically save active playbacks as Autoloads, or
you can manually allocate Autoloads to cues.
To automatically record active playbacks as Autoloads:
1> After selecting Cue List Record, turn on [Autoload Live
Playbacks] in the [Advanced Options] menu of the cuelist
record screen.
2> Turn on the playbacks you wish to load for this cue.
3> Save the cue. Active playbacks will be saved as Autoloads.