Operator`s manual

6. Cues - Page 83

PearlExpertTitan_Man_v4.doc 29/09/2010 16:27:00

new playback is set to lower priority than the first playback, the

fixture will not change.

This is useful if, for example, you’ve programmed looks using all your

fixtures, then you decide you want a couple of them to spotlight a

singer. If you set the Spotlight playback to be high priority, then

while it is active no other playback will affect the spotlight fixtures.

Swop also obeys the priority settings and this provides a useful way

of preventing certain playbacks from being swopped.

6.7.6 Blind mode

Individual playbacks can be set to Blind mode using this option. The

playback will then output only to Visualiser, not to the stage. This can

be very useful if you need to program cues during a live show.

6.7.7 Key Profile

Each playback can have an individual Key Profile allocated to it. This

allows you to customise the panel button functions differently for

each playback. A list of available Key Profiles is shown, or you can

add a new one. The softkeys show the function allocated to the blue

and grey buttons for each of the available Key Profiles.

If the playback Key Profile is set to “None”, the default global profile

is used.