Operator`s manual

3. Controlling dimmers and fixtures - Page 49

PearlExpertTitan_Man_v4.doc 29/09/2010 16:27:00

For variable attributes like Dimmer, holding down the button will

display a horizontal slider bar. You can then move your finger left or

right to change the value.

Active fixtures such as media servers will display a thumbnail of the

media clip in the button. The media server must support CITP and be

patched as an active fixture.

Fixtures which support keystoning or blades/shutters can be

controlled graphically in the attribute window. Select and drag the

corners or sides of the image to control the fixture.

Note: Updated personality files may be required to support the

keystone/blade functions

3.1.6 Setting attributes by number

You can directly enter a numeric value for the attributes which are

live on the wheels. You must be at the main Program menu to do this

(keep pressing Exit until the vertical menu bar shows “Program

Menu”).

Type a number on the numeric keypad then press

softkey E or F to set the value to wheel A or B. The

Softkey legend will show what effect your value is

going to have (such as [Gobo 5], or [Deep Blue]). If

your value is invalid for that attribute, a warning

symbol is displayed as shown on the right.