Operator`s manual

1. Setting up the console - Page 29

PearlExpertTitan_Man_v4.doc 29/09/2010 16:27:00

3> Press [OK] to confirm.

4> Press Exit to leave Disk mode.

• There is also an option E [Wipe] in the System menu (when the

key is turned to System) which has the same function, and is

located in the same place as on the “classic” Pearl versions.

1.7 Rebooting into original Pearl Expert mode

You can run the Pearl Expert in either Titan mode or the original Pearl

Expert mode. Click the [Switch Software] button on the VDU tools

menu to reboot the console into the desired mode.

Reboot into different

mode