Operator`s manual

Copyright Avolites Limited 2010
Page 22 – 1. Setting up the console
PearlExpertTitan_Man_v4.doc 29/09/2010 16:27:00
Workspace window options
You can change the window sizes and positions by clicking the small
‘i’ button in the top left corner of the window. These options also
allow you to set the button size and the text size of the window.
Saving workspaces
You can save different workspace setups to the Workspaces touch
buttons on the Touch Wing or to grey handle buttons on the console.
This is done by pressing View then [Record Workspace], then
touching one of the Workspaces buttons or pressing a grey button.
This allows you to reconfigure the workspace at the touch of a button.
Workspaces are saved with the show.
Setting up and recording workspaces is described in more detail in
section
11.1 on page 119.
Quick record
Some windows – Groups, Workspaces, Playbacks, and all the Palette
windows - have a Quick Record function. Set up what
you want to record, then touch or click the button once.
The button will light up red with a + sign. At this point
you can enter a legend. Touch or click again to store the
item.
The Quick Record function can be disabled using Key Profiles (see
section
11.2.1 on page 123).
Legends and picture legends
All touch buttons can have legends set to remind you
what they do. In addition, if you have the Touch Wing
connected you can draw picture legends on the
buttons. To do this, select [Set Legend] then press
[Picture]. A drawing space will open on the touch wing
for you to draw the legend.