Operator`s manual

1. Setting up the console - Page 21

PearlExpertTitan_Man_v4.doc 29/09/2010 16:27:00

Some workspace windows have option

settings or commands associated with

them. If the Touch Wing is connected,

these are positioned in the “context

buttons” area on the right of the Touch

Wing as shown in the picture above. If

the Touch Wing is not connected, a

drop down context menu is available at

the top right of each window.

Selecting and positioning workspace windows

You select which workspace windows you want to see using the

[Open Workspace Window] menu command on the root menu, or by

pressing the Window Selection buttons on the Touch Wing just below

the screen.

You can change the positions and sizes of the windows by using

[Window Options] on the View menu. The Touch Wing also has

pushbuttons for these functions. [Min or Max] swaps the active

window between full screen and quarter size. [Size and Position]

moves the active window around the possible positions. [Select

Window] gives you a list of windows to choose the active one, or on

the Touch Wing you can make a window active by touching its header

bar.

You can move the active window between the Touch Wing and the

external VDU monitor by pressing View then [Window Options] then

[Move Screen], or for the Touch Wing hold down the Avo button (on

the main console) and press the Size/Position button.

If a window shown on the VDU contains touch buttons, you can click

them using the mouse trackpad on the keyboard.

The function buttons (F1-F12) on the QWERTY keyboard can be used

to select and move workspace windows. See the list in section

11.1.2

on page

119.

Window shortcuts

Press View then an Attribute Bank button to open the Palette window

for that attribute.

Press View then Patch to open the DMX output window.

Press View then Connect to open the View Cue window.

Press View then Record Macro to open the Macro window.