Operator`s manual

Copyright Avolites Limited 2010
Page 158 – 15. Release notes
PearlExpertTitan_Man_v4.doc 29/09/2010 16:27:00
• Ignore Groups – Fan treats each fixture individually whether
selected individually or by a group.
• Fan Group as Fixture – All fixtures in each group take on the
same value.
• Fan Within Group – Fan runs across individual fixtures within
each group.
Freeze attributes: Freeze individual attributes of selected
fixtures and/or whole selected fixtures through [Edit Fixtures]
in [Patch]. Frozen attributes cannot be changed by either
playbacks or programmer. Deselect frozen individual attributes
of selected fixtures and/or whole selected fixtures, in [Edit
Fixtures] in [Patch] to release.
Blind Mode for programmer: Blind Mode is activated and
deactivated through the softkey options displayed when Shift is
held down.
Blind for playbacks: An individual playback can be set to
Blind through [Playback Options]. The playback will then only
output to Visualiser and not the stage.
Thro, And and @: Thro, And and @ keys allow dimmers and
fixtures to be selected and an intensity applied numerically via
the keypad.
DMX output mapping: DMX output mapping is now
available; this option is opened by selecting [DMX Settings] in
System Mode. You are presented with a list of DMX Nodes and
a list of DMX Lines. DMX Nodes can be assigned individually to
DMX Lines by selecting their individual assign key alternatively,
all DMX Nodes of one type can be assigned at once by selecting
the assign key in the header of a DMX Node type. DMX Nodes
can be cleared individually from DMX Lines by selecting their
individual clear key alternatively, all DMX Nodes can be cleared
from a DMX Line by selecting the clear key in the header of a
DMX Line or all DMX Nodes can be cleared from all DMX Lines
by selecting the clear key in the DMX Line header. Information
about a DMX Node can be accessed using the DMX Node’s
individual information key.
DMX view: A DMX view in which the output of each DMX
channel can be seen is now available through [Open Workspace
Window], [DMX].
Wheel acceleration: The sensitivity of the encoder wheels,
pan threshold and tilt threshold can all now be adjusted
through [Wheel Sensitivity] from within [User Settings] in
System Mode.
Russian language pack: Russian language pack available.
Chinese language pack: Chinese language pack available.