Operator`s manual

Copyright Avolites Limited 2010
15. Release notes - Page 157
PearlExpertTitan_Man_v4.doc 29/09/2010 16:27:00
15. Release notes
This section describes changes in the most recent version of software.
Please ensure you save and backup your shows before attempting to
upgrade any software.
Note: This section only lists the changes in the most recent update;
for changes in earlier versions, please check the release notes
provided on the console using the VDU menu option Help →
Release Notes.
15.1 Version 4.0
15.1.1 Upgrading from previous versions
Upgrading from v3: Copy the setup file to a USB memory stick. Using
the Tools menu, shutdown the console software, then use the Folders
option to locate the file on the memory stick and double click it to run
the installer.
There is no upgrade path from version 2 and lower, the software
must be installed by running a recovery disk. You can download a
recovery disk containing this software from Avolites download Please
follow the instructions given when downloading the recovery disk to
install this version.
15.1.2 New features in v.4.0
Undo / Redo: You can now undo and redo up to 20 actions.
This applies to the following actions:
• Clear
• Attribute adjustment (providing the Attribute Bank has been
changed after the adjustment).
• Keypad input.
• Palette application.
• Fixture selection.
• Group selection.
• Off.
• On.
• Align.
• Flip.
• Shape application.
• Locate.
Fan across groups: You can now apply fan to a number
groups rather than across individual fixtures. The option is
accessed by holding down [Fan] where you can choose
between: