Operator`s manual

Copyright Avolites Limited 2010
11. User Settings and other options - Page 127
PearlExpertTitan_Man_v4.doc 29/09/2010 16:27:00
11.4 DMX output mapping
The Pearl allows you a lot of flexibility in how you connect fixtures to
the console. As well as the 4 sockets on the rear of the desk, you can
connect fixtures using Ethernet and wireless links.
11.4.1 Configuring DMX outputs
Turn the key to System and select [DMX Settings] on the second
page of options. The screen shows a list of available DMX nodes
(places where you can send the DMX to) on the left, and a list of the
12 available DMX lines (outputs from the console) on the right. Each
DMX line can send data to one or more nodes. If you assign more
than one node to a line, those nodes receive duplicated data.
You can individually assign Nodes to Lines using the arrow button, or
assign all Nodes of the same type using the group assign button. For
example, to assign the four XLR output sockets on the back of the
console to for DMX lines, you would click on the Group Assign button
of the ExpertDMX nodes.
Group assign Individual assign
Group delete Individual delete