Operator`s manual

Page 126 – 11. User Settings and other options

PearlExpertTitan_Man_v4.doc 29/09/2010 16:27:00

11.3.4 Key Profiles

Allows you to modify the functions of some buttons. See section 11.2.

11.3.5 Contrast And Brightness (Lamp Intensity)

While you are in the System menu you can use the Wheels to adjust

the Contrast and Brightness of the onboard LCD display, and also the

brightness of the desk lamps. This option toggles the function of the

Wheels. The current function is shown on the display above the

wheels.

11.3.6 Wipe

The Wipe menu erases the current show. This is the same as the

[New Show] option on the Disk menu, but is provided here for

experienced Pearl users who are used to it being on the System

menu.

11.3.7 Display Setup

This option gives you a menu for enabling and disabling the external

VDU monitor and Touch Wing. If you don’t have a monitor and/or the

Touch Wing connected, set the option to “Disabled” to improve the

performance of the console.

The Touch Wing option can be set to Auto Detect, Enabled or

Disabled. Auto Detect is useful if you sometimes use the Wing and

sometimes not. If you never use it, set the option to Disabled.

11.3.8 DMX settings

This option allows you to configure the DMX outputs of the console

and is described in the next section.