Operator`s manual

Copyright Avolites Limited 2010
Page 100 – 8. Cue Lists
PearlExpertTitan_Man_v4.doc 29/09/2010 16:27:00
existing cues (for example, if you press playback 3, your new
cue will be 2.5).
• To Delete a cue, press the blue Delete button then the Select
button for the cue you want to delete. Press the Select button
again to confirm.
• To change the cue legend, press [Set Step Legend] then the
playback select for the step you want to change.
• If the cue list has more cues than there are playback faders,
you can swop to the next page using softkeys F and G.
8.3.2 Editing a cue list which is running
You can also edit cues in a cue list while you are running it without
using Unfold.
1> Fire the cue list by raising its fader.
2> Use Wheel A to select the cue number you want to change then
the white
↔ button above the Snap Back button to jump to it.
3> Press Clear to make sure the programmer is empty.
4> Make the changes that you want to the current step.
5> Press Rec. Step, then select [Replace], [Merge] or [Insert After]
to save the changes.
6> Press the
↔ button to jump on to the next step.
You can edit the times for a cue using the Rec Times button of the
controller as follows:
1> Fire the cue list by raising its fader.
2> Use Wheel A to select the cue number you want to change then
the white
↔ button above the Snap Back button to jump to it.
3> Press the Live Time button to set the times for the current step,
or the Next Time button for the next step. The Live and Next
step numbers are shown on the display above the controller
wheel.
4> Use the softkeys to set the times, linking and overlap settings
you want (see section
6.6.1 on page 79 for description of the
times). If you set the [Link to next step] option to On, then the
next cue will not wait for the Go button.
5> Press the
↔ button to jump on to the next step.
You can also use Unfold to set the times as described in the Unfold
section above.