User Guide

Page 160 - 7. Chases
Pearl 2004 Manual v1 - 27th August 2004
• Press the Go button to restart playback of the chase
• The Snap Back button changes the chase direction the first time
you press it; a second press will jump back a step (times and
fades are ignored)
• To set the “next” step to be a particular step number, type the
step number on the numeric keypad then press Connect.
• Turn either wheel to manually control the fades for this step. You
can fade up or down until the fade completes; once a fade has
completed it stays at 100%. Once the Fade In, Fade Out and LTP
fades are all completed the chase will move on to the next step.
The display above the wheel shows the fade up and fade down of
the previous step as a percentage. This function can be disabled
using the chase parameters menu.
• The Å and Æ buttons (next to the Go button) change the direction
of the chase. If the chase is stopped, these buttons jump
backwards and forwards a step.