User guide

5.1 Using the On Screen Display Menus

Regardless of whether you operate the VSS1000PD from the front panel or the

remote controller, you will need to become familiar with the OSD (On Screen

Display) menu structure if you wish to take full advantage of the capability of the

product.

5.1.1 Menu Navigation

If you are using the front panel control method, you can select the desired

function by pressing the tip of the joystick immediately above the MENU legend

to bring up the On Screen Display and then move the joystick to navigate to the

desired function. Once at the desired function, press the tip of the joystick to

make the selection and then move the joystick (left or right) to make the actual

adjustment. Once you’ve made the adjustment, press the top of the joystick a last

time to save your adjustment. Escape from the OSD menu modes is

accomplished by positioning the cursor over the word “Exit” in any menu and

then pressing the top of the joystick.

From the IR remote controller, press the menu key to activate the OSD, use the

arrow buttons to navigate to the selection you want and then use the arrow

buttons and the “OK” button to make your adjustment or selection. Press the

“Exit” button to escape from the OSD mode.

5.1.2 Menu Structure

The main structure is as follows:

Main Menu

Video (Or PC) Color Output OSD Info

Contrast User VGA H. Position Project

Brightness Normal SVGA V. Position Input

Hue Warm XGA Time Out Output

Sat Cool SXGA Background Date

Sharpness UXGA Exit

Picture Mode WXGA

Scale WSXGA

NR WUXGA

H-Position

WXGA+

V-Position

480i

Exit 480p

576i

PC Menu

576p