User guide
Chapter 6: Appendices 43
Uninstalling Pairing
1. Press either Control key twice to bring up the On-Screen Display Admin-
istrator Channel List menu.
2. Press Control twice again, select ‘Administrator Functions’ and press
Enter.
3. Select ‘Unit Configuration’ and press Enter.
4. Change the unit configuration to ‘Option 1, Tiered’.
5. Press Enter to save your selection and Esc to exit OSD.
6. Disconnect the serial and video cables from both SwitchView units.
7. Attach a keyboard and monitor directly to the slave unit.
8. Repeat instructions 1-5 on the slave unit.
9. The units may now be cascaded together or used separately.
Note: Please note that the channel list will need to be modied according to the Basic Channel
Maintenance instructions in the manual after uninstalling pairing.