User guide

Chapter 6: Appendices 39
5. Press the Control key twice more to activate the Administrator Command
Menu.
6. Using the arrow keys, highlight ‘Administrator Functions’ and press
Enter. This will bring up the Administrator Menu.
7. From here, highlight and select ‘Unit Configuration’.
8. Change the unit configuration selection to option 3, ‘Paired (Slave)’.
9. Press Enter to save your selection. Next, press the Esc key repeatedly to
exit from the OSD menu.
10. Power down the slave SwitchView OSD unit and disconnect the key-
board and monitor.
11. Repeat Steps 2-7 with the remaining master SwitchView OSD unit.
12. Now, choose option 2, ‘Paired (Master)’ for this unit. Press Enter to save
the selection and then press Esc repeatedly to exit the OSD menu.
13. Power down the master unit and disconnect the monitor.
Games
Administrator Command Menu
Program Manager
Channel Maintenance
ENTER-accept ESC-previous
Turn Scanning ON
Sequential Scan Dwell Time
Scanning Order
Reset Wheel Mouse/Keyboard
Version Information
Administrator Functions
Reset Standard Mouse/Keyboard
CYBEX Control Panel
Games
Administrator Menu
Program Manager
Select Unit Configuration
ENTER-accept ESC-previous
1: Tiered (Default)
2: Paired (Master)
3: Paired (Slave)
CYBEX Control Panel