User guide

Chapter 5: Channel Scanning 33
Setting the Scanning Dwell Time
(System Administrators and non-secure mode users. )
For Sequential Scanning
1. From the main OSD Window, press the Control key twice or type Alt-M
to access the Command menu.
2. Choose the option ‘Sequential Scan Dwell Time. ’
3. Enter a number between 2-60 seconds. The value you enter will be the
dwell time for each active channel in the system.
For Alphanumeric Scanning
1. Highlight the channel that you wish to configure in the main OSD
Window.
2. Next, press the Control key twice or type Alt-M to access the Command
Menu.
3. Select ‘Channel Maintenance’ from the Command Menu.
4. Choose the option ‘Alpha Scan Dwell Time’.
5. Enter a number between 0-255 seconds. Enter 0 to skip a channel
during scanning.