User guide

32 SwitchView OSD Installer/User Guide
Setting the Scanning Order
1. From the main OSD Window, press the Control key twice or type Alt-M
to access the Command Menu.
2. Choose ‘Scanning order’ from the menu.
3. Select either ‘Sequential order’ or ‘Alphanumeric order’.
4. Press Enter.
Turning Scanning On and Off
From the OSD menu.
1. From the main OSD Window, press the Control key twice or type Alt-M
to access the Command Menu.
2. Select ‘Turn scanning ON’ or ‘Turn scanning OFF’ from the menu. This
is a toggle option - only one scanning option will show on the menu
at any one time.
3. Press Enter.
By keyboard hot-key sequence (System Administrator or non-
secure mode only)
The following key sequences control scanning.
Key Sequence Action
<CM> SG <Enter> Enables the scan Go command.
<CM> SH <Enter> Enables the scan Halt command.