User guide

24 SwitchView OSD Installer/User Guide
The ID Window
The ID Window appears when you change channels and displays the
name of the selected channel. This window can be individually config-
ured for each channel in your system. The characteristics of the ID
Window can be changed from the Channel Maintenance Menu. This
option is only available if you are operating in non-secure mode or if you
are the system administrator.
Changing the Size, Color and Position of the ID Window
1. From the main OSD Window, press the Control key twice or type Alt-M to
access the Command Menu.
2. Select ‘Channel maintenance’ from the Command Menu.
3. Choose the option ‘Options for ID window’.
Follow the procedures outlined in the table below to change the size, color
or position of your ID Window.
Operation Procedure
Move the ID Window Use the arrow keys or mouse to move the ID Window's
position on the monitor. If the window ickers but does not
move, continue tapping the arrow keys until it moves back
into range.
Change window Press the <PAGE UP> key to cycle through
background color the available window background colors.
Change text color Press the <PAGE DOWN> key to cycle through the
available text colors.
Change window size Use the (+) and (-) keys to change the length of the ID
Window.
4. Press Enter to accept the changes or press Esc to exit the menu without
saving the changes.