User's Manual
Ports Navigation Tree
otp_login_authentication=
ppp_connection=
ppp|pap_authentication=
Command Summary
set_cas
Edits the command to configure a list of serial ports with the CAS pro-
file. Syntax: set_cas<serial port number>, <serial port number> This
command has five sub-nodes: physical, cas, data_buffering, alerts and
power.
set_dial_in
Edits the command to configure one serial port with the Dial-In profile.
Syntax: set_dialin<serial port number>
set_power
Edits the command to configure a list of serial ports with the Power pro-
file. Syntax: set_power<serial port number>, [<serial port number>]
This edit has two sub-nodes: physical and power.
clone_ports
Copies the configuration from one port to a list of serial ports. Syntax:
clone_ports<serial port number>
reset_port_to_factory
Resets the serial ports to factory configuration. (This is disabled for
CAS profile.) Syntax: reset_port_to_factory<serial port number>,
[<serial port number>]
enable_ports
Enables serial ports. Syntax: enable_ports<serial port number>,
[<serial port number>]
disable_ports
Disables serial ports. Syntax: disable_ports<serial port number>,
[<serial port number>]
Table 4.14: Serial Port Commands
Example of how to set a list of serial ports 2,5 and 6 with the CAS Profile and enable
the status:
--:- serial_ports cli-> cd /ports/serial_ports
--:- serial_ports cli-> set_cas 2,5,6
--:#- [serial_ports/physical] cli-> set status=enabled
--:#- [serial_ports/physical] cli-> show
Selected items: 2|5|6
Port: 2
enable_cisco_rj45_pin-out = no
42 Cyclades™ ACS6000 Advanced Console Server Command Reference Guide