Specifications

If you do not want to designate any virtual machines as managed, click Next
without adding any virtual machines to the managed list. Unmanaged virtual
machines are only available from the Hosted VMs window, where the status
of managed or unmanaged can be applied. See Virtual Machines Management
on page 4for more information.
7. (Not supported in some virtual environments) The Authorization Roles window opens. The
list displays the imported authorization roles for the hypervisor manager or server and
preset mappings to DSView 3 user-defined user groups. You can modify group mappings
once the Add Unit Wizard is complete; see Security on page 12. Click Next.
NOTE: Hypervisor manager or server roles that have the same name as an existing DSView 3 group are not
shown in the Authorization Roles window.
8. The Completed Successful window opens. Click Finish.
Virtual Machines Management
Before you can access or control a virtual machine from the DSView 3 software, a virtual
machine must be designated as managed in the DSView 3 software. Once this configuration
takes place, the units are available from the DSView 3 Target Devices and Virtualization
windows. Each managed virtual machine uses a managed device license in the DSView 3
software; see the DSView 3 help for more information.
If you use the virtual environment to add or remove a virtual machine and the virtual
environment and DSView 3 software are synchronized, the list of hosted virtual machines is
updated. If a virtual machine was added, it is available in the Hosted VMs window but remains
unmanaged until you designate it as managed.
To designate virtual machines as managed devices:
1. In the DSView 3 software, click the Units tab.
2. Click Virtualization in the side navigation bar.
3. Click on the name of the hypervisor manager or server you want to access. The Unit
Overview window opens.
4. Click Server Settings - Hosted VMs in the side navigation bar.
5. To designate virtual machines as managed, select the virtual machines from the Hosted
Virtual Machines list and click Manage. A status of Yes is displayed in the Managed
column, and the virtual machines are now available from the Target Devices and
Virtualization windows.
-or-
4 Technical Bulletin