Specifications
-or-
Click a unit type in the side navigation bar, then click Add. The unit type is
designated for you based on the navigation link you select. Click Next.
If you click Add from any Units View window not described, the Add Unit Wizard will not
include options for adding a hypervisor manager or server.
3. The Network Configuration window opens.
a. Enter the IP address of the unit type selected in the Address field.
b. Select either https or http as the protocol.
NOTE: The https protocol option is not displayed for units that do not support https.
c. The default TCP port number for the http or https protocol is populated for you. If
necessary, you can enter a different port number in the Port field.
d. Click Next.
4. The Server Credentials window opens.
a. Enter the username and password required to access the unit.
b. (Not supported in some virtual environments) If you want to use DSView 3 software
user credentials for virtual environment operations, select the Use DSView User
Credentials for Operations checkbox. If the checkbox is not selected, the credentials
provided for the hypervisor manager or server are used for all operations.
NOTE: If you select Use DSView User Credentials for Operations, you must also enable user credential caching in
the DSView 3 software.
5. If you selected https as the protocol, the Certificate window opens and displays the
certificate. Click Next to accept the certificate.
6. The Select Virtual Machines to Manage window opens. The list displays all virtual
machines hosted by the hypervisor manager or server and allows you to specify which
virtual machines are managed. Managed virtual machines can be accessed and controlled
from the Target Devices and Virtualization windows, while unmanaged virtual machines
are hidden and cannot be accessed.
a. Select the hosted virtual machines you wish to manage and click Add.
-or-
Select Manage all hosted virtual machines listed below.
b. Click Next.
-or-
DSView
®
3 Plug-in Virtualization Technical Bulletin3