Specifications

NOTE: (VMware only) If you do not need to access the VI Client on an attached ESX Server, you only need to
connect the VirtualCenter to the network and then you can access any attached ESX Servers as well.
Figure 1.1: DSView 3 Software System Configuration with a Connected Virtual Environment
Number Description Number Description
1 DSView 3 Software Client 4 Hypervisor Manager (Optional)
2
Virtualization Plug-In
5 Hypervisor Server
3
SOAP/https Connection
6 Virtual Machines
Table 1.1: System Configuration Descriptions
Adding a Hypervisor Manager or Server
You can add hypervisor managers or independent hypervisor servers to the DSView 3 software.
When you add a hypervisor manager, the attached hypervisor server(s) are added automatically.
Hosted virtual machines are also added automatically, and you can specify which virtual
machines are managed and accessible through the DSView 3 software.
NOTE: Adding a hypervisor manager or server by discovering units from a range of IP addresses is not supported.
To add a hypervisor manager or server to the DSView 3 software:
1. In the DSView 3 software, click the Units tab, then click Virtualization in the side
navigation bar.
2. Click Add. The Add Unit Wizard opens. Click Next. The Select Unit Type window opens.
Select a unit type from the list and click Next.
2 Technical Bulletin