Specifications
Example properties file
dls.localIp = <virtual machine IP address>
dls.queueSize = 100
dls.bufferSize = 1000
dls.waitTimeout = 10000
dls.packetSize = 4
dls.pipes = pipe1,pipe2
dls.pipe1 = pipe
dls.pipe1.type = input
dls.pipe1.filepath = <path to the fifo device>
dls.pipe2 = tcp
dls.pipe2.type = output
dls.pipe2.ip = localhost
dls.pipe2.port = <port used in the Virtual Machine>
dls.pipe2.encoder = ssh
dls.pipe2.encoder.ip = localhost
dls.pipe2.encoder.port = <DSView Syslog server port>
dls.pipe2.encoder.publicKeyFile = <path to the DataLogging key>
dls.pipe2.encoder.sshIp = <DSView IP address>
dls.pipe2.encoder.sshPort = <DSView SSH server port>
DSView 3 Software Events
NOTE: This feature is not supported in all virtual environments. Typically, if an operation is not supported, the
corresponding buttons and links will not be visible when the virtual environment units are selected.
The following virtual environment events are logged under the Reports tab in the DSView 3
software. The actions that cause these events may be initiated from the DSView 3 software or
from the virtual environment. For more information about events, see the DSView 3 help.
NOTE: The virtual environment also logs events. These events can be viewed from the DSView 3 software Unit
Overview window for a virtual environment unit. However, events logged in the virtual environment do not
correspond to DSView 3 software events, which are shown under the Reports tab.
DSView
®
3 Plug-in Virtualization Technical Bulletin27