Specifications

Configuring data logging in the DSView 3 software
You may enable data logging on multiple virtual machines on one hypervisor server, or you
may enable data logging one virtual machine at a time.
To view and configure data logging on multiple virtual machines on a hypervisor
server:
1. In the DSView 3 software, click the Units tab, then click Virtualization in the side
navigation bar.
2. Click on the name of the hypervisor server you want to access. The Unit Overview
window opens.
3. Click Server Settings, then click the Data Logging tab. The Data Logging window opens
and displays a list of hosted virtual machines and corresponding data logging status and
machine type.
4. To enable data logging on virtual machines, select the row(s) and click the Enable button.
-or-
To disable data logging on virtual machines, select the row(s) and click the Disable
button.
5. Click Close.
To view and configure data logging on a single virtual machine:
1. In the DSView 3 software, click the Units tab, then click Virtualization in the side
navigation bar.
2. Click the arrow next to the hypervisor manager or server to display hosted virtual
machines.
-or-
Click Virtual Machine in the side navigation bar to display all virtual machines.
3. Click on the name of the virtual machine you want to access. The Unit Overview window
opens.
4. Click VM Properties (Virtual), then click the Data Logging tab. The Data Logging
window opens.
a. To enable data logging on the virtual machine, select the row(s) and click the Enable
button.
b. To disable data logging on the virtual machine, select the row(s) and click the Disable
button.
22 Technical Bulletin