Specifications

2. Click on the name of the hypervisor server you want to access. The Unit Overview
window opens.
3. Click Server Settings, then click the General tab to view available information about the
hypervisor server, including IP address, version, manufacturer and model information.
To view hypervisor server hardware settings:
1. In the DSView 3 software, click the Units tab, then click Virtualization in the side
navigation bar.
2. Click on the name of the hypervisor server you want to access. The Unit Overview
window opens.
3. Click Server Settings, then click the Hardware tab to view the following hardware
information for the hypervisor server.
a. Click Processors to view general and system processor information.
b. Click Memory to view physical memory information.
c. Click Storage to view storage information, including identification, device, capacity,
free space and type.
d. Click Networking to view networking information, including virtual switch, total port
groups, number of ports and total physical adapters.
e. Click Storage Adapters to view the name, device, type and Storage Area Network
(SAN) identifier number for all storage adapters.
f. Click Network Adapters to view device, speed, configured, vSwitch and network
information for all network adapters.
To view hypervisor server software settings:
1. In the DSView 3 software, click the Units tab, then click Virtualization in the side
navigation bar.
2. Click on the name of the hypervisor server you want to access. The Unit Overview
window opens.
3. Click Server Settings, then click the Software tab to view software information for the
hypervisor server.
a. Click Licensed, then click Features to view a list of licensed features and their status.
-or-
Click Licensed, then click Add-Ons to view a list of licensed add-on components and
their status.
b. Click DNS and Routing to view host identification, DNS servers and default gateways.
18 Technical Bulletin