Specifications
3. Click Server Settings, then click the Events tab. The Events window displays a list of
events and the corresponding type, time of occurrence, tasks, target device address and the
user associated with the event.
4. Click Close.
To view VirtualCenter tasks:
NOTE: These tasks are stored in the VirtualCenter and do not correspond to DSView 3 software tasks.
1. In the DSView 3 software, click the Units tab, then click Virtualization in the side
navigation bar.
2. Click on the name of the VirtualCenter you want to access. The Unit Overview window
opens.
3. Click Server Settings, then click the Tasks tab. The Tasks window displays a list of tasks
and corresponding target device, status, time and the user who initiated the task.
4. Click Close.
To view VirtualCenter alarms:
NOTE: These alarms are stored in the VirtualCenter and do not correspond to DSView 3 software alerts.
1. In the DSView 3 software, click the Units tab, then click Virtualization in the side
navigation bar.
2. Click on the name of the VirtualCenter you want to access. The Unit Overview window
opens.
3. Click Server Settings, then click the Alarms tab. The Alarms window opens.
a. Click Triggered to view a list of any recently triggered alarms.
b. Click Definitions for a description of preset alarms.
4. Click Close.
Hypervisor server settings
The DSView 3 software can access and display the following hypervisor server settings. With
the exception of data logging, these settings are stored on the hypervisor server and do not
correspond to any DSView 3 software settings.
To view hypervisor server general settings:
1. In the DSView 3 software, click the Units tab, then click Virtualization in the side
navigation bar.
DSView
®
3 Plug-in Virtualization Technical Bulletin17