Specifications
VirtualCenter server settings (VMware only)
The DSView 3 software can access and display the following VMware VirtualCenter server
settings; these settings are stored in the VirtualCenter and do not correspond to any DSView 3
software settings.
To view VirtualCenter data centers:
NOTE: A VirtualCenter data center is an entity used to group VMware virtual machines and host entities.
1. In the DSView 3 software, click the Units tab, then click Virtualization in the side
navigation bar.
2. Click on the name of the VirtualCenter you want to access. The Unit Overview window
opens.
3. Click Server Settings, then click the Data Centers tab. The Data Centers window displays
a list of configured data centers and corresponding name and number of hosts and
connected virtual machines.
4. Click Close.
To view VirtualCenter clusters:
NOTE: A VirtualCenter cluster is a collection of hosts available for backing virtual machines.
1. In the DSView 3 software, click the Units tab, then click Virtualization in the side
navigation bar.
2. Click on the name of the VirtualCenter you want to access. The Unit Overview window
opens.
3. Click Server Settings, then click the Clusters tab. The Clusters window displays a list of
configured clusters and corresponding data centers, virtual machines and other
specifications.
4. Click Close.
To view attached ESX Servers:
1. In the DSView 3 software, click the Units tab, then click Virtualization in the side
navigation bar.
2. Click on the name of the VirtualCenter you want to access. The Unit Overview window
opens.
DSView
®
3 Plug-in Virtualization Technical Bulletin15