Specifications

6. To map hypervisor manager or server roles to DSView 3 built-in user groups, complete the
following steps:
a. Select a hypervisor manager or server role from the list.
NOTE: If a hypervisor manager or server role has the same name as an existing DSView 3 group in the DSView 3
software, an error message is shown and the virtual environment authorization role is not available for mapping.
b. Select a DSView 3 built-in user group from the list and click Add.
c. Select a preemption level from the list. For more information see the DSView 3 help.
d. With both the role and user group highlighted, click Map Role. The mapped role is
listed in the Mapped Roles table.
e. Click Save Roles.
Once saved, the imported hypervisor manager or server roles become user-defined groups in the
DSView 3 database. Any modifications must be done from the Users - Groups tab in the
DSView 3 software; for more information, see the DSView 3 help for more information.
Service addresses settings
For virtual machines that report multiple IP addresses, it may be necessary to designate the
primary IP address. For example, a virtual machine connected to a DCHP server may report both
a public and a private IP address. You can designate the public IP address as the primary to
allow remote sessions to be launched from the DSView 3 software.
To view and modify service address settings:
1. In the DSView 3 software, click the Units tab, then click Virtualization in the side
navigation bar.
2. Click on the name of the virtual machine you want to access. The Unit Overview window
opens.
3. Click Properties, then click Services Address (Virtual) in the side navigation bar. All IP
addresses reported by the virtual machine are listed.
4. To designate an IP address as the primary, select the IP address from the list.
5. (Optional) If you do not want the selected IP address to be automatically replaced when an
IP changed event occurs, deselect Update Services Address on IP Changed Events.
NOTE: By default, the Update Services Address on IP Changed Events option is selected. If selected, the primary
IP address is overwritten when new IP addresses are reported, which disables remote sessions if the primary public
IP address is overwritten by a private IP address.
6. Click Save, then click Close.
14 Technical Bulletin