User guide

Figure 4.2: Manual Video Adjust Dialog Box
Number Description Number Description
1 Image Capture Width 8 Pixel Noise Threshold
2 Pixel Sampling/Fine Adjust 9 Automatic Video Adjustment
3 Image Capture Horizontal Position 10 Refresh Image
4 Image Capture Vertical Position 11 Adjustment bar
5 Contrast 12 Video Test Pattern
6 Brightness 13 Performance Monitor
7 Block Noise Threshold 14 Close button
Table 4.2: Descriptions for Figure 4.2
2. Click the icon corresponding to the feature you wish to adjust.
3. Move the Contrast slider bar and then fine-tune the setting by clicking the Min (-) or Max (+) buttons to
adjust the parameter for each icon pressed. The adjustments display immediately in the Video Viewer
window.
4. When finished, click Close to exit the Manual Video Adjust dialog box.
Target video settings
The Image Capture Width, Pixel Sampling/Fine Adjust, Image Capture Horizontal Position and Image Capture
Vertical Position adjustments affect how the target video is captured and digitized. They are seldom changed.
The image capture parameters are automatically changed by the Automatic Adjustment function. A special image
is required on the target in order to make accurate adjustments independently.
36 MergePoint Unity™ KVM over IP and Serial Console Switch Installer/User Guide