User guide

To refresh the screen, click the Refresh Image button in the Video Viewer window, or select View - Refresh from
the Video Viewer window menu. The digitized video image is completely regenerated.
To enable Full Screen mode, click the Maximize button, or select View - Full Screen from the Video Viewer
window menu. The desktop window disappears and only the accessed device desktop is visible. The screen
resizes up to a maximum of 1600 x 1200 or 1680 x 1050 (wide-screen). If the desktop has a higher resolution,
then a black background surrounds the full screen image. The floating toolbar appears.
To disable Full Screen mode, click the Full Screen Mode button on the floating toolbar to return to the desktop
window.
To enable full scaling, select View - Scaling from the Video Viewer window menu. The device image scales
automatically to the resolution of the target device being viewed.
To enable manual scaling, select View - Scaling from the Video Viewer window menu. Choose the dimension to
scale the window. The available manual scaling sizes will vary according to your system.
Refreshing the Image
Clicking the Refresh Image button in the Manual Video Adjust dialog box completely regenerates the digitized
video image.
NOTE: You can also select View - Refresh from the Video Viewer window menu to refresh the image.
Video Settings
Additional video adjustment
Generally, the Video Viewer window automatic adjustment features optimize the video for the best possible
view. However, users can fine-tune the video with the help of Avocent Technical Support by selecting the Tools
- Manual Video Adjust command in the Video Viewer window menu or clicking the Manual Video Adjust
button. This displays the Manual Video Adjust dialog box. Video adjustment is a per target setting.
Users can also verify the level of packets per second required to support a static screen by observing the packet
rate located in the lower left-hand corner of the dialog box.
To manually adjust the video quality of the window:
NOTE: The following video adjustments should be made only with the help of Avocent Technical Support.
1. Select Tools - Manual Video Adjust from the Video Viewer window menu.
-or-
Click the Manual Video Adjust button.
The Manual Video Adjust dialog box appears.
Chapter 4: The Video Viewer 35