User guide

2. Select the desired setting for the Enable Activity Timeoutbox.
3. If necessary, select the time limit for the inactivity time-out.
4. Click Save.
Window Size
NOTE: The View - Scaling command is not available if the Video Viewer window is in Full Screen mode or to non-primary users of a
shared session.
When the MergePoint Unity switch OBWI is used for the first time, any open Video Viewer windows display at
a resolution of 1024 x 768 until the user changes the value. Each Video Viewer window can be set to a different
resolution.
The MergePoint Unity switch OBWI automatically adjusts the display if the window size changes during a
session as long as autoscaling is enabled. If the target device resolution changes any time during a session, the
display adjusts automatically.
To change the Video Viewer window resolution:
1. Select the View - Scaling command.
2. Select the desired resolution.
Adjusting the View
Using menus or task buttons in the Video Viewer window, you can do the following:
• Align the mouse cursors.
• Refresh the screen.
• Enable or disable Full Screen mode. When Full Screen mode is enabled, the image adjusts to fit the desktop
up to a size of 1600 x 1200 or 1680 x 1050 (wide-screen). If the desktop has a higher resolution, the
following occurs:
• The full-screen image is centered in the desktop, and the areas surrounding the Video Viewer window
are black.
• The menu and toolbar are locked so that they are visible at all times.
• Enable automatic, full or manual scaling of the session image:
• With full scaling, the desktop window remains fixed and the device image scales to fit the window.
• With automatic scaling, the desktop window is sized to match the resolution of the target device being
viewed.
• With manual scaling, a drop-down menu of supported image scaling resolutions is displayed.
• Change the color depth of the session image.
To align the mouse cursors:
Click the Align Local Cursor button in the Video Viewer window toolbar. The local cursor should align with
the cursor on the remote device.
NOTE: If cursors drift out of alignment, turn off mouse acceleration in the attached device.
34 MergePoint Unity™ KVM over IP and Serial Console Switch Installer/User Guide