User guide

Figure 4.1: Video Viewer Window (Normal Window Mode)
Number Description
1
Title Bar: Displays the name of the target device being viewed. When in Full Screen mode, the title bar
disappears and the target device name appears between the menu and toolbar.
2 Thumbtack: Locks the display of the menu and toolbar so that it is visible at all times.
3
Menu and toolbar: Enables you to access many of the features in the Video Viewer window. The menu and
toolbar is in a show/hide state if the thumbtack has not been used. Place your cursor over the toolbar to display
the menu and toolbar. Up to ten commands and/or macro group buttons can be displayed on the toolbar. By
default, the Single Cursor Mode, Refresh, Automatic Video Adjust and Align Local Cursor buttons appear on
the toolbar. For more information, see Changing the toolbar on page 33 and Macros on page 46.
4 Macro buttons: Commonly used keyboard sequences that can be sent to the target device.
5
Minimize button: Minimizes the display of the Video Viewer window into the task bar at the bottom of the local
computer.
6
Maximize button: Changes the window to Full Screen mode, which expands the accessed device desktop to fill the entire screen.
Expanding the window causes the following to occur:
The title bar disappears.
The target device name appears between the menu and toolbar.
The Maximize button changes to a Normal Window Mode button and appears on the toolbar. Clicking the button toggles the Video
Viewer window to Normal Window mode.
The Close button appears on the toolbar.
Table 4.1: Descriptions for Figure 4.1
32 MergePoint Unity™ KVM over IP and Serial Console Switch Installer/User Guide