User guide

Access levels
When a user account is added, the user may be assigned to any of the following access levels: Appliance
administrators, User administrators and Users.
Access Level
Operation
Appliance
Administrator
User Administrator Users
Configure interface system-level
settings
Yes No No
Configure access rights Yes Yes No
Add, change and delete user accounts Yes, for all access levels
Yes, for users and user administrators
only
No
Change your own password Yes Yes Yes
Access target device Yes, all target devices Yes, all target devices
Yes, if
allowed
Table 3.6: Allowed Operations by Access Level
To add a new user account (administrator only):
1. On the side navigation bar, select Unit View - Appliance - Appliance Settings - User Accounts - Local
Accounts to open the Appliance Local User Accounts screen.
2. Click the Add button.
3. Enter the name and password of the new user in the blanks provided.
4. Select the preemption and access levels for the new user.
5. Select any of the available target devices that you wish to assign to the user account and click Add.
NOTE: User administrators and appliance administrators can access all target devices.
6. Click Save.
To delete a user account (administrator only):
1. On the side navigation bar, select Unit View - Appliance - Appliance Settings - User Accounts - Local
Accounts to open the Appliance Local User Accounts screen.
2. Click the checkbox to the left of each account that you wish to delete, then click Delete.
To edit a user account (administrator or active user only):
1. On the side navigation bar, select Unit View - Appliance - Appliance Settings - User Accounts - Local
Accounts. The Appliance Local User Accounts screen is displayed.
2. Click the name of the user you wish to edit. The user profile will appear.
3. Fill out the user information on the screen, then click Save.
Chapter 3: Local and Remote Configuration 27