User guide

To log in to the MergePoint Unity switch OBWI from outside a firewall, repeat the above procedure, entering
the external IP address of the firewall instead.
Using the user interfaces
After you have been authenticated, the user interface appears. You may view, access and manage your
MergePoint Unity switch, as well as specify system settings and change profile settings. Figure 3.1 shows the
user interface window areas for the MergePoint Unity switch, and descriptions are provided in the following
table.
Figure 3.1: User Interface Window
Number Description
1
Top option bar: Use the top option bar to bookmark an interface window, refresh the display of an interface
window, print a web page, log out of a software session or access the Avocent Technical Support help page.
The name of the logged in user appears on the left side of the top option bar.
2
Side navigation bar: Use the side navigation bar to display the system information you wish to display or edit,
which displays in the content area. The side navigation bar also contains icons in the top left corner which, when
clicked, expand or collapse allnodes.
3 Content area: Use the content area to display or make changes to the MergePoint Unity switch OBWI system.
Table 3.2: Descriptions for Figure 3.1
Using the side navigation bar
You can use the side navigation bar to display windows in which you can specify settings or perform operations.
Clicking on a link that does not contain an arrow will display its corresponding window.
Chapter 3: Local and Remote Configuration 17