Owners manual

On-Board Web Interface .....31
presentedtoanattachedtargetbytheVGAandDVItransmitters,respectively.Theseentries
provideawaytogetbacktothedefaultEDIDifyoupushadifferentEDIDtoatransmitter.
To pull monitor attributes:
1. OnthesidebarunderPullMonitor,clickPull.
2. SelectareceiverfromthelistandclickPull.Themonitorwillbeaddedtothelistinthe
Peripheralspane.
To push the monitor attributes:
1. OnthesidebarunderPushMonitor,clickPush.
2. SelectoneormoretransmittersfromthelistandclickPush.Themonitorattributeswillbe
pushedtotheselectedtransmitter(s).
To delete a monitor:
1. SelectoneormoremonitorsfromthePeripheralspane.
2. OnthesidebarunderDeleteMonitor,clickDelete.
3. ClickDelete toconfirm.
System Settings Tab
TheSystemSettingstabiswheretheOBWIsettingsanddefaultsettingsareconfigured.Allofthe
settingsforasystemcanbesavedorreloadedfromthesystemsettingstab.
Save settings to file
Thesavesettingstofileoptionallowsyoutostorethesystemsettingsasabackup.Thesettings
canbereloadedlatertorestorethesystembacktoapreviousstate.
To save the system settings:
1. OnthesidebarunderSaveSettingstoFile,clickSave.
2. Enterapasswordifyouwishtoencryptthefile.Becausethesettingsfileincludespotentially
sensitiveuserauthenticationinformation,itishighlyrecommendedthatyouprovideasecure
passwordtobeusedtoencryptthefile.
3. ClickNext.
4. Clickthelinkinthedialogboxtodownloadthefile.
Load settings from file
Savedsystemsettingscanbereloadedtorestorethesystemtoapreviousstate.