Owners manual

On-Board Web Interface .....27
Setting Description
WakeonLANMACaddress
TheMACaddresstowhichtheWakeonLANsignalshould
besent.UseMAC-48orMAC-64formatsuchas
xx:xx:xx:xx:xx:xxorxx:xx:xx:xx:xx:xx:xx:xx,whereeachxisa
hexadecimaldigit.Youmayalsousehyphensinsteadof
colons,suchasxx-xx-xx-xx-xx-xx.
USBMode
DetermineswhatUSBdeviceswillbeextendedtothe
attachedtargetbythistransmitter.
LCDbacklight DetermineswhethertheLCDbacklightwillbeonoroff.
Allowedaccess
Determinesthetypeofconnectionsthatcanbeestablished
withthistransmitter(Shared,Privateoreither).
Trafficpriority
DetermineswhetherUSBorvideotrafficshouldbegiven
higherpriority.
Audiooutput
Controlswhetheranyaudiooutputfromthetarget,
connectedtothegreenjackonthetransmitter,willbesent
acrosstheKVMsessiontothereceiver.
Microphoneinput
Controlswhetheranymicrophoneaudiosentacrossthe
KVMsessionwillbepassedontothetargetviathepinkjack
onthetransmitter.
To edit the transmitter settings:
1. Selectatransmitterfromthelistofdevices.
2. ClickontheSettingstab.
3. Changethedesiredsettings.
4. ClickSave.
Transmitter – Status tab
TheStatusofthetransmitterincluding,theserialnumber,EID,statusandportnumberare
displayedonthestatustab.
Transmitter – Sessions tab
TheSessionstabforthetransmitterdisplaysallKVMsessionscurrentlyconnectedtothe
transmitter.
Modes
Therearethreemodesavailableforusersconnectingtotransmittersandreceivers.Themodes
arePrivateonly,SharedonlyandPrivateorShared.Thetransmittersettingistheauthorityifthere
isconflictintheuserorreceiversetting.Forexample,ifthetransmitterissettoprivateonlyand
userand/orreceiverissettosharedonly,theuserwillnotbeabletoconnecttothetarget.The
PrivateorSharedModeisthedefaultmodefordevices.