Owners manual

On-Board Web Interface .....23
To reboot a device:
1. FromtheDevicestab,selectoneormoredevicesandclickReboot.
2. ClickReboot toconfirm.Thestatusofthedevicewillchangetorebootpending,offlineand
thenbacktoreadywhenthedevicecompletesrebooting.
Remove device
DevicesthatarenolongerbeingusedcanberemovedfromtheMatrixswitch.
To remove a device:
1. FromtheDevicestab,selectoneormoredevicesandclickRemove.
2. ClickRemove toconfirm.Thedevicewillberemovedfromthelist.
Remove offline
AllofflinedevicescanberemovedbyusingtheclickingRemove Offline - Remove.Thisprovidesa
convenientwayforyoutocleanupyourlistofdevicesafteroneormoredeviceshavebeen
physicallyremovedfromthesystem.
Flash display
TheLCDdisplaycanbesettoflashtohelplocateatransmitter,receiverorswitch.
To flash the LCD display:
Selectoneormoredevices,thenclickFlash inthesidebar.Youwillbepromptedtoenterthelength
oftimetoflashthebacklight.
NOTE: Avalueofzerocanbeusedtostopabacklightthatiscurrentlyflashing.
Switch details
WhenintheDevicestab,ifyouselectaswitch,youwillbeabletoviewandeditoptionsforthe
switchincludingthemode,attributesandtheIPaddress.Theoptionsyoucaneditdependon
whethertheswitchisthemaster(theoneyouareloggedinto),aslave,oraswitchthatbelongstoa
differentcascadesystem.Alloptionsareeditableonthemaster.Someoptionsareeditableona
slave.Nooptionsareeditableonamasterorslavethatbelongstoadifferentcascadesystem.
Switch mode
Youcanchangethemodeoftheswitchyouareloggedintobychangingthecascadeparticipation
setting.Changingfrommastertoslaveorslavetomasterhassignificantimplications.Ifyouchange
aswitchfrommastertoslaveorslavetomaster,theswitchwillautomaticallyreboottoeffectthe
change.