User guide

Chapter 3: Operations 29
4. If the user has access to more than one target computer, then the list of target computers is
presented.
5. Click the Connect button to establish a connection.
To initiate a connection with a remote computer in Matrix Mode:
1. Press
Print Screen.
2. Enter the Login Name and Password, ensuring that the appropriate keyboard has been selected.
3. Click the OK button to accept the changes.
4. In Matrix Mode, the Target window displays.
Figure 3.5: Target Screen (Matrix Mode)
5. Select the remote computer to which you wish to connect and click Connect.
NOTE: Once a remote computer has been selected, Matrix Mode denies access to any other user.
Access through Auto-Login Mode
Using the HMX Manager, an administrator can enable Auto-Login Mode. Once this step is
complete, the HMX user station is reset by the HMX Manager and it attempts to connect to the
specified transmitter. A login progress message will be seen at this point.
NOTE: The OSD will clear after a defined period of inactivity. To reactivate the OSD, enter a valid hotkey
sequence.
For Sales
& Service:
PRECO 888-842-4632
www.preco.net/avocent