User guide

Chapter 3: DSView Server 69
Using unit status polling
To use unit status polling:
1. From the side navigation bar, click Unit Status Polling. The DSView Server Unit Status
Polling Properties window will appear.
Figure 3.11: DSView Server Unit Status Polling Properties Window
2. Select Enable unit status polling.
3. Type the number of seconds to wait between pollings (from 30- 999 seconds). The default is
900 seconds (15 minutes).
NOTE: Change this number to a smaller value for greater accuracy.
4. Type the number of managed appliances that may simultaneously be polled to obtain status
information (from 1-25 units). The default is 5.
NOTE: Use a larger number for a faster speed.
5. Click Save to store DSView software unit status property information in the DSView software
database on the host.