User guide

66 DSView Installer/User Guide
Specifying DSView Client session information
To specify DSView Client session information:
1. From the side navigation bar, click DSView Client Sessions. The DSView Server Client
Session Properties window will appear.
Figure 3.9: DSView Server Client Session Properties Window
a. Use the arrows to specify a time-out value (from 5-60 minutes) for inactivity of a DSView
user Client session. The default is 15 minutes. When the time-out value has been
exceeded, the session will end and the DSView user must log in again.
b. Select the Enable certificate authentication to allow the DSView software to
automatically log in internal DSView users if the user certificate (X.509 digital ID)
installed in the DSView Client web browser matches the certificate configured for the
DSView user. Certificates for DSView users may be modified using the User Certificate
window. See Modifying the certificates associated with DSView users on page 233 for
more information.