User guide

Chapter 3: DSView Server 65
•Click Use the proxy server only for clients connecting with the following address to
enable only DSView Clients with IP addresses entered in the Address List to
communicate with DSR switches and CPS appliances using the DSView proxy
server. All other clients communicate directly with DSR switches and
CPS appliances.
2. Click Save. A confirmation dialog box will appear.
NOTE:Changing the Proxy Port or Proxy Invocation setting will disconnect active DSView Client sessions.
3. Click OK to save your changes.
-or-
Click Cancel to cancel the action.
Specifying trap destinations
1. From the side navigation bar, click Trap Destinations. The DSView Server Trap Destinations
window will appear.
Figure 3.8: DSView Server Trap Destinations Window
2. In each address field, type the IP addresses in standard dot notation (xx.xx.xx.xx) or the
domain name for the computer that handle traps. Up to four computers may be specified.
3. Click Save to store the trap information in the DSView software database on the host.