User guide

442 DSView Installer/User Guide
To refresh the Power view:
From the menu bar when the Power view is displayed, select View - Refresh.
To power up an SPC socket:
1. From the side navigation bar, select Power. A list of SPC sockets attached to the switch will
appear in the content area.
2. Select an SPC socket that has not been powered up and select Tools - Power On from the
menu bar.
-or-
Select an SPC socket that has not been powered up and click the Power On toolbar button.
-or-
Right-click on an SPC socket that has not been powered up and select Power On from the
shortcut menu.
The SPC socket will power up and the icon for the SPC socket in the content area will change.
To power down an SPC socket:
1. From the side navigation bar, select Power. A list of SPC sockets attached to the switch will
appear in the content area.
2. Select an SPC socket that has not been powered down and select Tools - Power Of f from the
menu bar.
-or-
Select an SPC socket that has not been powered down and click the Power Off toolbar button.
-or-
Right-click on an SPC socket that has not been powered down and select Power Off from the
shortcut menu.
The SPC socket will power down and the icon for the SPC socket in the content area
will change.