User guide

Appendices 437
Power view
Selecting Power in the side navigation bar of the DSR Remote Operations window will display a
list of SPC sockets attached to the switch and their powered up or powered down status.
Figure C.4: DSR Remote Operations Window (Power View)
Table C.2: DSR Remote Operations Content Area Icons (Servers View)
Icon Description
A target device that is powered up and has no established KVM Video Viewer
sessions.
A target device that has an active KVM Video Viewer session.
A target device that is not powered up
A target device that is powered up but cannot establish a KVM connection because
the path to the target device is blocked (for example, a cascade switch has only one
user port and that port is already connected to another target device).