User guide

434 DSView Installer/User Guide
The DSR Remote Operations software uses an SSL-based connection to the DSR switch to
authenticate the DSView user.
If the DSView Server is unreachable, the switch will use its internal database to perform remote
authentication. If the internal database of the DSR switch fails to authenticate the DSView user
when a log in is attempted, or the user does not log in before the specified time out of the DSR
switch, the modem connection will be disconnected.
NOTE: DSView users may be managed within the internal database of the DSR switch using the PPP
Configuration menu. See the installer/user guide for your DSR switch for more information.
Figure C.1: Using the DSR Remote Operations Software with a DSR Switch
See Installing the DSR Remote Operations Software (Optional) on page 43 for
installation information.
DSView Server
(Authentication)
DSR Remote
Operations Client
Analog User
(OSCAR)
DSR Switch
Modem
Ethernet
Telephone
Network