User guide

430 DSView Installer/User Guide
Figure B.4: Ports Used with A CPS Appliance Proxy Server Connection (Serial)
DSView Server ports
The DSView Server uses the HTTPS port for communication with DSView Clients and Spoke
DSView Servers. Changes made to the browse list through the DSView 3.0 management software
are transmitted back to the DSView Server host, which refreshes its browse list view over the TCP/
IP port 443 connection. Changes to the DSView software are also copied to and from the Hub
DSView Server over the specified HTTPS port.
Generic appliance ports
If you are using a generic appliance in your DSView system, you may use a Telnet connection
through TCP/IP port 23, or an HTTP connection through TCP/IP port 80. The connection is made
directly between the DSView Client and the generic appliance.