User guide

404 DSView Installer/User Guide
• Detailed Description - Displays detailed information about an audit event. Detailed
descriptions may including items such as the name of a target device, DSView Server,
DSView user and so on. For example, an MIB-II interface link up trap would contain
Appliance change of state in the Description column, while the Detailed Description column
would contain Generic link up interface 1.
• DSView Server - Displays the name of the DSView Server where the event was logged.
• Event ID - Displays a unique identifier for an audit event. The Event ID column is useful for
filtering and sorting displays based on a specific event type.
• Trap Enterprise - Displays the enterprise object identifier for a received SNMP trap. See
Modifying DSR switch or CPS appliance SNMP settings on page 168 for more information.
• Unit - Displays the name of a managed appliance for an audit event.
• User - Displays the DSView user associated with an event. For example, this column shows the
name of the DSView user who deleted a unit when a Unit Deleted event is detected.
See Using the Customize Link in DSView Software Windows on page 15 for information on using
the Customize link.
DSView software events
Table 10.2 through Table 10.10 list the events that may occur within a DSView system.
Table 10.2: DSView Software Appliance Events
Appliance Events
Event ID Description Event ID Description
1:0 An unrecognized event was received 1:11 Appliance upgrade result
1:1 Appliance cold start 1:12 Appliance authentication failure
1:2 Appliance warm start 1:13 Appliance diagnostic information
1:3 Appliance viewer session started 1:14 Appliance user logged in
1:4 Appliance viewer session stopped 1:15 Appliance user logged out
1.5 Appliance viewer session terminated 1:16 Appliance alert from attached server
1:6 Appliance component added 1:17 Appliance configuration changed
1:7 Appliance component removed 1:18 Appliance command issued
1:8 Appliance component restarted 1:19 Appliance incorrect state detected
1:9 Appliance change of state 1:20 Appliance threshold exceeded
1:10 Appliance upgrade started