User guide

Chapter 9: Using DSView 3.0 Management Software Tools 395
To modify the properties of a task:
1. From the Tasks window, click the name of the task you wish to modify. The side navigation bar
will include the name of the task that you are modifying.
2. From the side navigation bar, click Properties. A Task Properties window will appear.
3. Modify the properties of the task. See the operating sequence for the task type in Adding tasks
using the Add Task Wizard on page 378 for information on modifying the task.
Firmware Management
The FLASH firmwares for DSR switches and CPS appliances may be added, viewed and deleted
using the Appliance Firmware Files window. Once a FLASH firmware file(s) has been added, you
may use the file(s) to upgrade the DSR switch or CPS appliance.
Figure 9.37: Appliance Firmware Files Window
To display the Appliance Firmware Files Window:
1. From the DSView 3.0 Explorer, click the System tab.
2. From the top navigation bar, click Appliance Files. Appliance Files - Firmware is automati-
cally selected in the side navigation bar and the Appliance Firmware Files window will appear.