User guide

Chapter 9: Using DSView 3.0 Management Software Tools 387
c. Click Next.
3. The Select When to Run the Task window will appear.
a. Select a time to run the task. See Specifying when to run tasks on page 371 for information
on specifying when and how often to run a task.
b. Click Next.
4. The Specify Export Audit Log Properties window will appear.
Figure 9.31: Add Task Wizard - Specify Export Audit Log Properties Window
a. Type the directory in which to create the audit log, which may be a local drive on the
DSView Server or at a location specified by a UNC path.
NOTE: The directory name must be entered in case-sensitive text if your operating system supports case-
sensitive filenames.
b. Click Login required to access shared drive location if the location specified is a network
drive that requires a log in. Then, type the username and password and confirm the
password of a user account that has read/write access to the network share location.
NOTE: The Location field cannot be set to a mapped network drive. It must be set to either a physical local drive
or a shared network location specified as a UNC path.